QUICKMO Sanding Machine Consumables and Abrasive Brush Rollers

Full Range of Aftermarket Consumables for Wide-Band, Double-Side and Contour Sanding Machines — Custom Sizes Available

The QUICKMO Consumables Series is the complete range of wear parts and abrasive rollers engineered to keep every QUICKMO sanding machine — and most other brands of wide-band, double-side, contour and CNC sanding equipment — running at peak performance. Manufactured and supplied by Qingdao Kuaimo Technology Co., Ltd. in Qingdao, China, our consumables range covers flexible sanding belts, serrated abrasive belts, sisal strip brushes, nylon strip brushes, sandpaper strip brushes, composite grinding brush wheels, large sanding flower rollers and polyurethane contact rollers, with full non-standard customization available.

Why Consumables Matter

A sanding machine is only as good as the abrasive on it. Even the most precision-built sander will leave poor finishes, burn the work, or scratch the panel if the belts, brushes and rollers are mismatched, worn out, or made to the wrong dimensions.

QUICKMO supplies every wear part that touches the workpiece, engineered to match our own machines — and cross-compatible with most common wide-band, double-side and contour sanding equipment on the market. Buying consumables from the machine builder means the grit, density, roll diameter, shaft bore and abrasive width are correct from day one, with no trial-and-error fitting.

Full Product Range

Our consumables catalog covers eight core product families:

1. Flexible Sanding Belts

Endless flexible abrasive belts for wide-band calibrating sanders, available in aluminum oxide, zirconia and ceramic grain across the full grit range (P36 to P1200). Belts are spliced for high-speed running, balanced to avoid vibration, and available in all standard widths up to 1300 mm.

2. Serrated Sanding Belts

Serrated (slotted) abrasive belts used on flexible contour and edge sanding machines. The slots let the belt flex over profiled surfaces, conforming to curved and shaped parts rather than only sanding the high spots. Available in various slot patterns to match different contour sanders.

3. Sisal Strip Brushes

Natural sisal brushes used for polishing and surface finishing on solid wood panels. Sisal is a semi-aggressive natural fiber that carries abrasive compound to a fine, polished surface without leaving deep scratch patterns. Used on polishing stations in calibrating sanders and dedicated polishing machines.

4. Nylon Strip Brushes

Abrasive-filled nylon strip brushes for uniform surface brushing, contour sanding and light deburring. The nylon filaments hold abrasive grain and flex over profiled surfaces, making them ideal for edge sanding and curved work. Available in different filament grits and densities.

5. Sandpaper Strip Brushes

Strip brushes built from folded sandpaper leaves — the “flower” style brushes used on contour sanders and brush sanding machines. Each leaf is a small abrasive flap that wears progressively, exposing fresh grain over the life of the brush. Available in cylindrical and disc forms.

6. Composite Grinding Brush Wheels

Composite abrasive wheel brushes used for edge blending, deburring and light stock removal. Built from bonded abrasive filaments in a dense wheel form, these are the workhorse wheels on edge sanders and contour finishing machines.

7. Large Sanding Flower Rollers

Large-diameter flap rollers and flower rollers built for wide contour sanding machines. Each roller is a dense cylinder of folded abrasive flaps, available in diameters up to the full working width of the sander. Used on flexible contour sanders for 3D and profiled panels.

8. Polyurethane Contact Rollers

Polyurethane contact rollers that back up the abrasive belt in calibrating sanders. The roller durometer (hardness) is matched to the job — hard rollers for aggressive calibration, soft rollers for conformable finishing. Available in different diameters and shaft bores.

Compatible with Your Whole Sanding Line

Our consumables are engineered to fit:

• Wide-band calibrating sanders — belts, contact rollers, pressure bars.
• Double-side thickness sanding machines — top and bottom belts, lower roller brushes.
• Contour and curved-surface sanders — flexible belts, flower rollers, flap wheels.
• CNC grinding and sanding cells — custom abrasive discs and brushes.
• Wire brush and texturing machines — replacement wire and nylon brush rollers.

If you are running QUICKMO equipment, every consumable is a direct OEM replacement. If you are running another brand, send us the old part or its dimensions and we will cross-reference it.

Custom Non-Standard Sizes

Every workshop has that one odd-size roller, that one custom belt width, that one special brush diameter. QUICKMO supports non-standard customization:

• Send us the dimensions, grit and abrasive type you need.
• Our engineering team builds the roller or belt to your specification.
• Minimum order quantities are reasonable, and lead times are short.

This is especially useful for shops running custom profiles, legacy machines with obsolete parts, or special-finish production runs.

Consistent Quality, Steady Supply

Because QUICKMO builds both machines and consumables, we know exactly what each abrasive should do on each machine. Our consumables are:

• Grit-consistent, so finish quality does not vary from belt to belt.
• Dimensionally accurate, so rollers drop straight onto the machine shaft.
• Sized for balanced high-speed running, avoiding vibration and belt wander.
• Stocked for fast shipment, with common sizes ready to go.

Why Buy Consumables from QUICKMO?

• One supplier for machines and wear parts — no hunting across vendors.
• Direct cross-reference to your existing sanding equipment.
• Custom sizes for non-standard machines and special profiles.
• Full grit range from aggressive P36 calibration belts to fine P1200 polishing.
• Shipped worldwide, alongside machine purchases or as standalone orders.

Ready to Order Consumables?

When you order, please have ready:

• Machine model and manufacturer.
• Roller or belt dimensions (width, diameter, shaft bore).
• Abrasive type and grit.
• Quantity needed.

Send us these details and we will quote the correct part, usually within one business day.