提及设备型号

1300R-R Two Heads Thickness Calibration Sanding Machine

Twin-Head Single-Pass Calibration and Fine Polishing for Doors, Furniture and Panel Stock

The 1300R-R Two Heads Thickness Calibration Sanding Machine is QUICKMO’s 1300 mm wide twin-head calibrating sander, built for shops that need both thickness calibration and fine surface finishing in a single pass. Manufactured by Qingdao Kuaimo Technology Co., Ltd. in Qingdao, China, the 1300R-R pairs two independent sanding frames in one machine — a calibrating head for aggressive stock removal and a polishing head for fine finishing — so solid wood panels, plywood, MDF and door components come out of the machine both dimensionally uniform and surface-ready.

Two Heads, One Pass

A single-head wide-belt sander either calibrates aggressively or polishes finely — it cannot do both well in one pass. To get a dimensionally uniform panel with a smooth, paint-ready surface, most shops run the board through twice: once on a coarse calibrating head, once on a fine polishing head.

The 1300R-R eliminates that second pass. Its two sanding frames are arranged in series along the conveyor:

• First sanding frame (infeed side): a calibrating head that removes stock aggressively to bring the panel to target thickness.
• Second sanding frame (discharge side): a fine sanding and polishing head that blends out coarse scratches and leaves a smooth, uniform surface.

The panel goes in rough and comes out calibrated and polished, in one continuous pass.

Built on a Rigid Frame Structure

The 1300R-R uses a heavy, frame-based welded structure engineered for shock absorption and noise reduction. This is not a cosmetic detail: a rigid frame is the foundation of consistent sanding. Vibration causes chatter marks, uneven wear and inconsistent pressure — all of which show up on the finished panel. By integrating advanced overseas design principles with the practical operating needs of domestic woodworking shops, QUICKMO has built a machine that stays square and stable through years of daily production.

Precision Calibration with Integrated Eccentric Roller

A key feature of the 1300R-R is its eccentric steel roller integrated with the belt pulley. In conventional sanders, the roller and pulley are separate components, and small alignment errors accumulate at high speed. By combining them into a single precision-machined unit, the 1300R-R holds a truer concentric run, which translates directly into more uniform abrasion and higher processing accuracy across the whole panel width.

Variable-Frequency Feed and Automatic Fault Protection

Like all QUICKMO sanders, the 1300R-R is built around variable-frequency feed drive:

• VFD conveyor speed. Feed rate is set on the HMI and held constant — slow for aggressive stock removal, fast for light finishing.
• Automatic bed lowering on fault. If air pressure drops, the sanding belt misaligns, or the emergency stop is triggered, the conveyor bed automatically lowers. This opens a gap between the panel and the sanding heads, preventing workpiece damage and reducing the risk of belt breakage.
• Independent head lift and pressure. Each sanding frame can be raised, lowered and pressure-adjusted independently, so the operator controls exactly how much material comes off in each station.

Flexible Use: Calibration Only, Polishing Only, or Both

One of the most practical features of the 1300R-R is its flexibility. The two sanding frames can be used independently or together:

• Both frames together for full calibration and fine polishing in one pass — the default mode for door and furniture production.
• Calibration frame only when the panel just needs thickness adjustment, with the polishing head retracted.
• Polishing frame only when the panel is already at thickness and just needs surface smoothing between coats or before lamination.

This means one machine covers three common sanding jobs, instead of requiring two dedicated machines.

What the 1300R-R Handles

The 1300R-R is engineered for a wide range of woodworking substrates:

• Solid wood composite materials and edge-glued panels, calibrating faces to uniform thickness.
• Particleboard, MDF and fiberboard, preparing panels for veneering, lamination or painting.
• Plywood and hardwood plywood, sanding faces and removing core-vein unevenness.
• Cabinet doors and furniture components, delivering both thickness control and a smooth, paint-ready surface.
• Panel products for furniture, flooring and joinery, where dimensional consistency is a spec.

The 1300 mm working width accommodates most standard door, furniture and panel sizes.

Integrated Light, Mechanical, Electrical and Pneumatic Control

The 1300R-R integrates light, mechanical, electrical and pneumatic systems into one unified control architecture. This is more than a marketing phrase: it means the HMI, feed drive, sanding head pneumatics and safety interlocks all talk to each other. Faults are detected immediately, protective actions are taken automatically, and the operator gets clear, immediate feedback on what is happening. Height adjustment is straightforward, and the machine’s layout is logical — maintenance access, abrasive changes and day-to-day operation are all designed around the operator.

Who Is the 1300R-R For?

The 1300R-R is the right choice when:

• You need both thickness calibration and fine polishing, and you want them in one pass rather than two.
• You run doors, furniture components or panel goods where surface finish matters as much as thickness.
• You currently use a single-head sander and are running boards through twice to get a finished surface.
• You want a robust, frame-built machine that holds tolerance over years of production.
• You value the safety of automatic bed-lowering on fault conditions.

Shops needing double-side (top-and-bottom) calibration in one pass should look at our WKXS R-R630-3 double-side line; shops needing contour and profile sanding should look at the GP1300 flexible series. For single-side twin-head calibration and polishing, the 1300R-R is the workhorse.

Why Choose QUICKMO

Qingdao Kuaimo Technology Co., Ltd. has spent more than a decade designing and building woodworking sanding equipment from our Qingdao facility. We integrate design, manufacturing and in-house engineering, which means customers deal directly with the people who build the machine — no dealer layers, no ambiguity about support. We ship worldwide, provide documentation and remote commissioning guidance, and stand behind every machine with a “quality first, service first” commitment.

The 1300R-R Two Heads Thickness Calibration Sanding Machine is the practical, production-grade answer to shops that need twin-head calibration and polishing in a single robust, easy-to-use platform.

Ready to Talk About Your Project?

If your door, furniture or panel operation is running boards through twice to get a calibrated and polished surface, the 1300R-R is built for exactly that work.

Contact QUICKMO today with your panel sizes, target thickness tolerance and production volume, and our engineers will recommend the right configuration for your operation.